There are three major steps involved in water damage clean-up . They are all important and should be followed accordingly. Following the three steps will give a guarantee to a thorough clean-up of the homes. It is thus important to inquire if the company one is going for will ensure the three processes are followed. If not so, it is right to look for one that will offer the three processes. When carrying out the damage clean-up process, it is good to ensure good supervision to achieve the very best at the end of the process. Below show the basic steps that should be followed in any water damage clean-up process.
Extraction. The first step conducted in any water damage clean-up process is the extraction stage. This is carried out through the use of various machines. One of the commonly used equipment in this process is the pump. The work of the machine is remove out the stagnant water in a certain area. It should be operated by a competent person who has a well-know of the machines. It is a faster process especially when dealing with large area that has been affected by the water damage. Once the process has been done, it is wise to confirm whether it has fully dried as it is supposed to be. If not, ensure the person under carrying the steps repeats it until it is fully dray of the ragging water.
Drying. Once the extraction process has been carried out successfully, the next step to take is the drying process. Once all the standing water has been drained from the affected area, the drying process is now set to begin. For this process to be completely effective, the personal or the individual carrying out the process should ensure maximum air circulation. This will help in encouraging a fast drying process. However, there are some equipment that are usually used when undertaking the process. They include tools like the fans and the dehumidifiers. They should be fully utilized to ensure maximum drying is achieved at the end.
Restoration. Having successfully completed the first and the second step, the next stage is the restoration of the damaged area. This can be done by replacing or rather repairing items that were affected when the incidence occurred. For floors that have been into water for more than one day, they should be replaced and not repaired. This will ensure that the house remains stable even after the situation is already rectified. All wall affected should also be replaced. This is to prevent the effect of molds that might have built on in the previous state. Replacing the wall swill also prevent any further mold growth to the house. Following the above three process will help in reclaiming the structure that was completely damage by the water. It is important to ensure that the process is carried out systematically and by the person who has great knowledge. Remember, using of the equipment also requires people with skills and experience.