Ways Of Installing Plumbing In A New Home

Installation of plumbing works in a new home is mainly the process of coming up with water systems and the draining away of waste water from the house. The process is carried out by personnel referred to as plumbers. In order to carry out plumbing installation , one should be licensed with the relevant body. This will approve the quality of individuals work. For this process to go through, there are a number of steps that one ought to follow in order to ensure successful installation. They step are discusses in the following below topics.

Installation timetable. Before casting of the foundation concrete, it is necessary to pour out the sewer accommodation stubs. Once this is laid down, most of the plumbing works are then carried out once that structure is raised. Piping works goes hand in hand with wiring. It should be noted that; in this stage, the major drains are connected on the floor and connected to the stack. At the same time water supply units are also fixed and the main areas where toilets are located are also set at the ground floor.

Plumbing fixtures. These are usually started along as the walls and the door and window are framed. They include the showers units and tubs. Such elements are carried out at this time since they are large to be set once the walls and the frames are fixed. Once the flooring is through, it is important to set and connect the sinks together with the commodes. All the opening that are done by the plumber should be blocked with papers or old material to prevent them from being broken as well as scratched when other activities are running.

Water supply systems. This unit enter in the house through the frost line and later spreads in two different lines. One is for cold water while the other is meant for hot water. Once this is done, water can then be supplied in various appliances using the two lines.

Drainage pipes. the systems run from the ground to the roofline in a vertical direction. Waste pipes are then directed to the waste system and drained away from the house to the septic tank.

Vent pipes. For every drain, it requires ventilation which is the source of air that prevent pipes from blocking from the waste material. These vent can be constructed as one. In addition, many people situate such vents beneath the sink as an additional for fixtures and other appliances.

Traps. This is a u-shaped pipe that is usually connected to the sinks and showers. This is suited to hold a small amount of water that can be used to prevent bad odor from the sewers. Except for the commodes, all other fixtures use the drain traps. These are the major steps that one should ensure they are set while installing plumbing works in any new building. They should always be carried by a qualified person who has all the approval from the concerned licensing firms.